 |
 |
 |
|
- Allis Chalmers - Fits: [ WD, WD45 (using Eaton belt driven power steering pump) ]
Case - Fits various models
Char-Lynn - Replaces: 20928, 21048
Cockshutt - Fits various models
Eaton - Replaces: 20928, 503-1003, 503-1005-005, 554, 14072, 760-5, P101, P761
Ford - Fits: [ 2000 4 cylinder, 2111, 2120, 4000 4 cylinder, 4121, 4140, 600, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 821, 841, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981 (1957 - 1964 (for tractors with canister on top pump) Will require new pressure hose fitting 5/8"-18 male inverted thread - FDS5161) ]; Replaces: C0NN3A674H, C3NN3A674C
Ford Industrial - Fits: [ 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130, 4030 4 cylinder, 4040, 4130 4 cylinder (1957 - 1964 (for tractors with canister on top pump) Will require new pressure hose fitting 5/8"-18 male inverted thread - FDS5161) ]
IH Industrial - Fits: I6, ID6
International / Farmall - Fits: H, HV, M, MD, MDV, MTA, MV, O6, ODS6, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, Super W6, Super W6TA, Super WD6, Super WD9, W400 (W400), W450 (W450), W6, WD6, WDR9, WR9S, [ 300, 350 (Rowcrop) ], 600, 650; Replaces: 363185R91
Fits John Deere - [ A, B, G, 50, 520, 60, 620, 70, 720 (Using Eaton style pump & Char-Lynn power steering) ]
MH Industrial - Fits: 404
Massey Ferguson - Fits: 303
Massey Harris - Fits: 33, 333, 44, 44-6, 444, 44K, 44 Special
Oliver - Fits: Super 66, Super 77, Super 88, 66, 660, 77, 770, 88, 880
- Improved redesigned pump uses a bearing instead of original bushing.
- Can be adapted to tractors using Char-Lynn power steering with Eaton pump.
- This is designed to be used with a external mounted reservoir. Port block ABC1414 and bolt ABC1419 are used in some applications to give a place to hook up hose to reservoir.
Does not include brackets, top mounted reservoir or pulley.
Most Ford applications will require a new pressure hose with 5/8" - 18 male inverted flare, See our FDS5161
- Shaft diameter measures 0.670"
- Shaft length (where pulley mounts) measures 0.575"
- Pump housing is 2" thick (where bracket bolts to)
- Shaft has a 1/8" woodruff key and is threaded for a 5/16" bolt
- Flow @ 1500 RPM = 2.5 GPM
- Pressure relief set @ 1200 PSI
|
|
|
 |
|
 |
|