IH Combines - Fits: [ 205, 303, 315 (Serviceable, must use 1.781" Dia. intake valve seat, gas, LP) ], 403, 453, 503, 615, 715
IH Industrial - Fits: 2606 (Serviceable, must use 1.781" Dia. intake valve seat, gas, LP), [ 2656, 2706, 2756, 2806, 2826, 2856 (all gas, LP) ], Industrial: 3600A, 3616 (Serviceable, must use 1.781" Dia. intake valve seat, gas, LP), 3800, 3850, H30, H30B, H50A, H50B, H50C, H60B
IH Miscellaneous - Fits: 50 (Forage Harvester)
International / Farmall - Fits: [ Hydro 70, Hydro 86, 656, 666, 686, 706, 756, 766, 806, 826, 856 (all gas, LP) ], [ 414, 416, 420, 422, 616, 622 (Cotton Picker) ], [ 460, 606 (Serviceable, must use 1.781" Dia. intake valve seat, gas, LP) ], 560 (Correct for Eng. Sn: 7088 & up, Serviceable for earlier Sn:, must use 1.781" Dia. intake valve seat, gas, LP), 660 (Correct for Eng. Sn: 7088 & up, Serviceable for earlier SN:, must use 1.781" Dia. intake valve seat, gas, LP), [ Industrial: 303, 303A (Motor Grader) ], 9000 (Forklift), T6-62 (Crawler);
Replaces: Valve guide: 237248R1, Valve springs: 367192R1, Keeper (lock): 41339D, Valve stem seals: 866834R1, Intake valve: 234275R1, 234276R1, Exhaust valve: 372699R3, 404179R1
Fits International 6-cylinder gas, LP engines:
C-221
C-263
C-282
C-291
C-301
Included in this kit are the valves, guides, springs, keepers (locks), and stem seals. The dimension of the intake valve is 5.072" long and the head diameter is 1.781". The exhaust valve is 5.053" long and the head diameter is 1.516". The spring length is 2.438".
NOTE: Fits C221 when also using 1.781" intake valve seats, C263 above engine Sn: 7088 or use the 1.781" intake valve seat, , C282, C291 and C301 gas and LP engines with cylinder head casting #'s 164414, 164415, (319723R1, 367188R1, 373423R1,& 387718R1, 319723R1 must use 1.781" intake valve seats) 380938R1, 382099R1, 383666R1, 387972R1, 387972R2, 387972R3.